Proud to be part of america's second oldest industry.
.22 Barrel Blank
.22 Barrel Blank
$22.00

.22 Barrel Blank

These are .22 LR barrels, button rifled, 1018 steel, 7/8" x 1" x 2.5" long, chambered with MATCH or STANDARD reamers.  Barrels are in-the-white, faced off on the chamber end and rough cut on the muzzle end.  Being raw steel, they may have slight surface rust on the exterior.

*Each price is for ONE barrel blank. 

These are available to U.S. customers only and the price includes shipping to the continental U.S.  FL residents must pay sales tax.  

Is chambered with a MATCH reamer so the rounds don't just drop in...they require a bit of a push to insert the cartridge.  This is done primarily for those building our GB-22, which fires from an open bolt so there's nothing holding the cartridge in battery before firing.  They are faced off on the chamber end, saw cut on the muzzle end. Note that we run the reamer in about .060" deeper than a standard match reamer, and we do this for two reasons: 1) You don't have to push the cartridge in as far.  2) If you're using this for a GB-22 and are going to do the .285" diameter counterbore called out on the drawing, you'll still have a correct chamber depth.  

Generic .22 LR barrel. Chambered with a STANDARD reamer.  They are faced off on the chamber end, saw cut on the muzzle end. 

Chambered with a STANDARD reamer.  They are faced off on the chamber end, saw cut on the muzzle end.  The TYPE Three barrel blanks have slight defects in the rifling so are best used in a gun buyback gun.  If you're making a "keeper", then please choose the TYPE 1 or TYPE 2.

 

Type One

Is chambered with a MATCH reamer so the rounds don't just drop in...they require a bit of a push to insert the cartridge.  This is done primarily for those building our GB-22, which fires from an open bolt so there's nothing holding the cartridge in battery before firing.  They are faced off on the chamber end, saw cut on the muzzle end. Note that we run the reamer in about .060" deeper than a standard match reamer, and we do this for two reasons: 1) You don't have to push the cartridge in as far.  2) If you're using this for a GB-22 and are going to do the .285" diameter counterbore called out on the drawing, you'll still have a correct chamber depth.  

Type Two

Generic .22 LR barrel. Chambered with a STANDARD reamer.  They are faced off on the chamber end, saw cut on the muzzle end. 

Type Three

Chambered with a STANDARD reamer.  They are faced off on the chamber end, saw cut on the muzzle end.  The TYPE Three barrel blanks have slight defects in the rifling so are best used in a gun buyback gun.  If you're making a "keeper", then please choose the TYPE 1 or TYPE 2.